nextnano.NEGF - Software for
Quantum Transport

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Transmission through a 3D nanowire =====
We apply the Contact Block Reduction (CBR) method to a simple GaAs nanowire of cuboidal shape.
The corresponding tutorial for nextnano<sup>3</sup> is [[https://www.nextnano.com/nextnano3/tutorial/3Dtutorial_CBR_nanowire.htm|here]]. To simulate 3D (or 2D) system with CBR method in nextnano++ correctly, The quantum regions have to be appropriately specified in the input file. 
<code>
quantum{
	region{
		name = "lead_1"
		x    = [-5,5]
		y    = [-5,5]
		z    = [-0.1,0.1]
		boundary{ x=dirichlet y=dirichlet z=cbr }
                Gamma{ num_ev = $num_eigenstates_device }
	}
}
</code>
Since the simulation is three dimensional, the lead region specified here has to be two dimensional. The number $\pm0.1$ is chosen to be smaller than the grid spacing, so that the region "lead_1" becomes a 2D sheet (//Note: this is slightly different in nextnano<sup>3</sup> input//). CBR boundary condition has to be imposed in the propagation direction, i.e. z-direction, whereas Dirichlet boundary condition is set for perpendicular directions.

<code>
cbr{
         name = "device"
         lead{ name = "lead_1" }
         lead{ name = "lead_2" }
         delta_energy   = $delta_energy
         abs_min_energy = $E_min
         abs_max_energy = $E_max
         options        = [1, 0, 0]
}
</code>
The program calculates transmission through the region "device". On this device, two leads are attached. The resolution, minimum and maximum of the energy axis can be also tuned here.

nextnano.NEGF - Software for Quantum Transport

User Tools

Site Tools

Page Tools

nextnano.NEGF - Software for
Quantum Transport