User Tools

Site Tools


qcl:advanced_settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
qcl:advanced_settings [2020/10/20 14:48]
thomas.grange
qcl:advanced_settings [2020/11/16 17:57] (current)
thomas.grange [Parallelization]
Line 14: Line 14:
 For optimal performances,​ we recommended that <​Maximum_Number_of_Threads>​ does not exceed the number of **physical** cores (when hyperthreading is activated, the number of physical cores is half the one on logical processsors). For optimal performances,​ we recommended that <​Maximum_Number_of_Threads>​ does not exceed the number of **physical** cores (when hyperthreading is activated, the number of physical cores is half the one on logical processsors).
  
-=== Parallization ​in case of combined Temperature-Voltage sweep ===+=== Parallelization ​in case of combined Temperature-Voltage sweep ===
 In the case where a combined Temperature-Voltage sweep is used, there are two levels of parallelization. The first is at the level of the command <​Threads>​ in the <​SweepParameters>​ section. In the case where a combined Temperature-Voltage sweep is used, there are two levels of parallelization. The first is at the level of the command <​Threads>​ in the <​SweepParameters>​ section.
  
qcl/advanced_settings.txt ยท Last modified: 2020/11/16 17:57 by thomas.grange