User Tools

Site Tools


qcl:photon-assisted_transport_and_gain_clamping

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
qcl:photon-assisted_transport_and_gain_clamping [2020/11/20 14:03]
thomas.grange
qcl:photon-assisted_transport_and_gain_clamping [2020/11/20 14:14] (current)
thomas.grange
Line 58: Line 58:
 === Example: Mid-infrared QCL  === === Example: Mid-infrared QCL  ===
  
-The following ​animatd ​gifs show the electron density, current density and output as the voltage is swept.+The following ​animated ​gifs show the electron density, current density and output as the voltage is swept. Above the threshold bias (around 300 meV), the clamping of the gain to the cavity losses results a rapid increase in the internal electric field in the cavity. The photon-assisted transport results in a discontinuity in the slope of the current-voltage characteristics at the threshold bias/​current:​ above threshold, the current increases much faster as stimulated emission reduces the upper laser level lifetime.
 {{:​negf:​bai2011_electrondensity.gif?​direct&​600|}} {{:​negf:​bai2011_electrondensity.gif?​direct&​600|}}
 {{:​negf:​bai2011_current.gif?​direct&​600|}} {{:​negf:​bai2011_current.gif?​direct&​600|}}
 {{:​negf:​bai2011_emission.gif?​direct&​600|}} {{:​negf:​bai2011_emission.gif?​direct&​600|}}
qcl/photon-assisted_transport_and_gain_clamping.1605880994.txt.gz ยท Last modified: 2020/11/20 14:03 by thomas.grange